Horns: part 4 (Assembly)

"Crown" or Base:

The Base is where the horns will be attached to. And the base itself attaches to the forehead of the helmet

Inside (and out of focus), you can see 2 black strips. These are metal plates. (Random junk I found around the house) These are glued down with superglue. Their purpose for which I may or may not use, is the contact points in which the magnets would attach themselves to the rest of the helmet. (the forehead)

 Ripped up a square of paper towel.

These are for "fillers" inside the "crown" and the "horns". It would fill the empty space inside, grabbing the wooden posts and sticking them onto the inside walls of the horns.

Backside of the entire assembly.

- Metal plates (shown in light brown)

- Paper towels (shown in green squiggly lines) - They fill the volume of space inside

- Wood with screws (shown in grey) - The paper towels are soaked with resin and would 'grab' onto the wooden dowels and nails. Just randomly wrapping around them. Making sure the towels also touch all sides of the walls.  Both unifying everything and giving it strength.

You can see the entry holes where I pour my resin into. Filling whatever space there is. This would give the proper solid feel to the entire assembly.

80% done. Ready for details and paint!